Dalgıç Motorun Analitik, Sayısal, Performans Sonuçlarının Karşılaştırılması

Serdal ARSLAN
1.389 814

Öz


Asenkron motorlar endüstride en fazla kullanılan motorlardır. Bu motorların geometrik ve tasarımsal bazı özellikleri değiştirilerek kullanım alanları çeşitlilik göstermiştir. Bu uygulama alanlarından biri de tarımsal sulama uygulamalarıdır. Dalgıç motor olarak kullanılan asenkron motorların; küçük çap, paket boyu uzunluğu ve çalışma ortamların farklılık göstermesi temel tasarım parametrelerini (akım yoğunluğu, sıcaklık, vb.) değiştirmektedir.

Bu çalışmada; ANSYS-Maxwell paket programı kullanılarak 75KW (100Hp) dalgıç asenkron motorun analitik (RMxprt), sonlu elemanlar çözümü Maxwell 2D kullanılarak gerçekleştirilmiştir. RMxprt ve Maxwell 2D’de elde edilen çözüm sonuçları deneysel veriler ile karşılaştırılmıştır.


Tam metin:

PDF ÖZET

Referanslar


İ. Tarımer Politeknik Der. 8(1) (2005) 19.

M. Çunkaş S.Ü. Müh.-Mim. Fak. Der. 27(4) (2012) 136.

Z. Ping, S. Scott, J. C. Zoltan, Dynamic modeling of three phase and single phase induction motor, International Conference IEMD'99, Electric Machines and Drives, Seattle-USA, (1999) 556.

A. Deshmukh, A. A. Bhole IJEET 5(9) (2014) 39.

M. Sundaram, P. Navaneethan American Journal of Applied Sciences 8(4) (2011) 393.

J. B. Danilevich, V. N. Antipov, I. Y. Kruchinina, Y. Khozikov, Design considerations of submersible unprotected solid-rotor induction motor, ICEM 18th International Conference on Electrical Machines, Vilamoura-Portugal, (2008) 1.

M. A. Choudhury, M. A. Rahman IEEE Transactions on Industry Applications 28(3) (1992) 680.

X. Yongming, M. Dawei, W. Jiabin, Numerical Calculation of End Leakage Reactance of Submersible Motor, ICEET'09 In Energy and Environment Technology, Guilin-China, (2009) 184.

H. Arabacı, O. Bilgin, A. Ürkmez, The Detection of Rotor Faults in the Manufacturing of Submersible Induction Motor, Int. Aegean Conference on Electrical Machines and Power Electronics (ACEMP '07), Bodrum-Turkey, (2007) 222.

L. Xin, H. Zhuo, W. Liguo, L. Linlin, X. Dianguo, Submersible Motor Rotor Bars Broken Fault Analysis Based on HHT, IEEE 7th International Power Electronics and Motion Control Conference, Harbin-China, (2012) 2398.

D. Meng, Y. Liu, Y. Xu, Q. Zhang, Analysis and Calculation of 3-D Temperature Field of Submersible Motor Rotor, Power and Energy Engineering Conference (APPEEC), Chengdu- Asia-Pacific, (2010) 1.

V.A. Gundale, M.S. Kulkarni International Journal of Engineering Research and Applications (IJERA) 2(1) (2012) 299.

Z. Bingyi, L. Bingxue, F. Guihong, Z. Fuyu, Research of multipolar permanent magnet synchronous submersible motor for screw pump, ICMA In Mechatronics and Automation, Harbin-China, (2007) 1011.

L. Jianjun, Z. Jibin, J. Xintong, F. Xinghe, Electrical-thermal Coupled Calculation of a Submersible Motor Used for Deep-sea Electromagnetic Propeller, 14th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), Chicago, USA, (2010) 1.

W. Jiabin, Y. Pan, Research of six-pole permanent magnet submersible motor design, 6th International Forum on Strategic Technology (IFOST), Harbin-China, (2011) 545.

S. F. Rabbi, M. A. Rahman, S. D. Butt, Modeling and operation of an interior permanent magnet motor drive for electric submersible pumps, IEEE In Oceans-St. John's, St. John's, Canada, (2014) 1.

Z. Bingyi, Z. Liu, H. Ding, K. Liu, G. Feng, Study on unit combination type direct-driven submersible permanent magnet motor, 17th Electrical Machines and Systems (ICEMS), Hangzhou-China, (2014) 3087.

B. Liu, XH. Bao, J. Liu, QL. Zhu, Insulation Life Prediction of High Voltage Submersible Motor Based on BP Neural Network, Int. Conference on Consumer Electronics Communications and Networks (CECNet), XianNing-China, (2011) 418.

I.A. Metwally, A. Gastli, M. Al-Sheikh Electric power systems research 77(8) (2007) 1065.

M. Cunkas, R. Akkaya, O. Bilgin, Torque optimization of submersible motors using evolutionary algorithms, Innovations in Intelligent Systems and Applications (INISTA), Istanbul-Turkey, (2011) 365.

M. Çunkaş, A. Ürkmez Gazi Üniv. Müh. Mim. Fak. Der. 23(3) (2008) 645.

Anonim, http://ansoft-maxwell.narod.ru/en/CompleteMaxwell2D_V12.pdf (Erişim tarihi: 01th of May, 2015).

A. Fenercioğlu, İ. Tarimer Selçuk Üniversitesi Teknik Bilimler Meslek Yüksekokulu Teknik-Online Der. 6(3) (2007) 221.

R. De Weerdt, R. Belmans, Squirrel cage induction motor end effects using 2D and 3D finite elements, Seventh International Conference, In Electrical Machines and Drives, Durham-England, (1995) 62.

Anonim, IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, IEEE Standard, 112, 1991.